VCS VIP 1000 Manuel d'utilisateur télécharger pdf (Page 48)

48 en | Configuration Using a Web Browser VIP XD

DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems

SNMP traps

You can select which traps are to be sent.

1. Click Select. A list is opened.

2. Click the checkboxes to select the required traps. All the checked traps will be sent.

3. Click OK to apply the selection.

Authentication

If a RADIUS server is employed in the network for managing access rights, authentication

must be activated here to allow communication with the unit. The RADIUS server must also

contain the corresponding data.

To configure the unit, you must connect the VIP XD directly to a computer using a network

cable. This is because communication via the network is not enabled until the Identity and

Password parameters have been set and successfully authenticated.

Identity

Enter the name that the RADIUS server is to use for identifying the VIP XD.

Password

Enter the password that is stored in the RADIUS server.

RTSP port

If necessary, select a different port for the exchange of the RTSP data from the list. The

standard RTSP port is 554. Select Off to deactivate the RTSP function.

5.20 Encryption

A special license, with which you will receive a corresponding activation key, is required to

encrypt user data. You can enter the activation key to release the function on the Licenses

page (see Section 5.22 Licenses, page 51).

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 79 80

Pas de commentaire

VCS VIP 1000 Manuel d'utilisateur Page 48