VCS VIP 1000 Manuel d'utilisateur télécharger pdf (Page 33)

VIP XD Configuration Using a Web Browser | en 33

Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06

5.9 Monitor Display

The VIP XD can recognize transmission interruptions and display a warning on the monitor if

set accordingly.

Display transmission disturbance

Select On if the monitor is to display a warning in the event of a transmission interruption.

Disturbance sensitivity

You can set the level of interruption at which the display should be triggered.

Disturbance notification text

Enter the text that the VIP XD should display on the monitor. The maximum text length is

31 characters.

5.10 Audio (Audio Version Only)

You can set the gain of the audio signals to suit your specific requirements. Your changes are

effective immediately.

If you connect via Web browser you must activate the audio transmission on the

CONNECTIONS page (see Section 6.2 The CONNECTIONS Page, page 56). For other

connections, the transmission depends on the audio settings of the respective system.

Audio

The audio signals are sent in a separate data stream parallel to the video data, and so increase

the network load. The audio data are encoded according to G.711 and require an additional

bandwidth of approx. 80 kbps for each connection. If you do not want any audio data to be

transmitted, select Off.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 79 80

Pas de commentaire

VCS VIP 1000 Manuel d'utilisateur Page 33