VCS VIP 10 Manuel d'utilisateur télécharger pdf (Page 47)

VIP X1 | Installation and Operating Manual EN | 47

Bosch Security Systems | 2006-12 | V2.5 Configuration using a Web browser

Audio settings (audio version only)

You can set the gain of the audio signals to suit your specific requirements.

The current video image is shown in the small window next to the slide controls

to help you check the selected audio source and improve assignments. Your

changes are effective immediately.

If you connect via Web browser you must activate the audio transmission on the

Livepage configuration page (see page 94). For other connections the trans-

mission depends on the audio settings of the respective system.

Line In 1: / Microphone (MIC):

You can set the gain of the audio signal for the line input and for the microphone

input. Make sure that the display does not go beyond the green zone during

modulation.

Line Out/Speaker (SPK):

You can set the gain of the line and loudspeaker output. Make sure that the dis-

play does not go beyond the green zone during modulation.

Selection

Click one of the option boxes and then click Set to display the level of the respec-

tive audio input for orientation and to set the gain.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 143 144

Pas de commentaire

VCS VIP 10 Manuel d'utilisateur Page 47